Did you know that the Mercedes Dealer isn't able to offer almost all Flip Blade IR Keys to their customers any longer? You can open up a new revenue stream for your business by attending this 4-hour class taught by Donnie Sherfield. You will be shown the ins and outs of the KR55 Key Maker and how to add-a-key and perform AKL (All Keys Lost) on Mercedes Sprinters, ML Series, S Class, and Chrysler Crossfire vehicles that use an IR Flip Key. Outside of the OEM Factory Tool, the KR55 is the only device in the world that can program a working remote to these vehicles.

New to BMW Key Programming or new to the Mini ACDP? Consider taking this 4-hour class taught by Donnie Sherfield. This class will walk you through all the needed steps to program BMW Keys with the ACDP, including app and hardware setup. BMW CAS1-CAS4 Systems will be discussed and demonstrated. Gain the confidence that you need to add keys and perform AKL (All Keys Lost) procedures on these BMW Vehicles.

In this class taught by Shon Mordehay, we will discuss keyed ignition JLR vehicles and the modules related to key programming on these vehicles. During this 8 hour class, you will learn where the modules are located, how to remove these modules, and how to program keys to the vehicles. We will also discuss PTS (Push To Start) JLR vehicles and their KVM modules. Demonstrations will be conducted with the VVDI2, VVDI Prog, VVDI Key Tool Plus, and Tango. JLR Key Programming can be complicated, but this class will help to take a lot of the mystery out of it.

This class will be almost 100 percent hands-on. Students will break into groups of two while Donnie Sherfield instructs them on how to program keys via EEPROM during this 8-hour class. Each group of students will be provided with a Laptop, VVDI Prog, Tango, and the same modules that the instructor has so that they can follow along with the instructor and complete the task in real time. Modules to be reviewed include, but are not limited to, Toyota ECU, Saab CIM, Volvo Blue/Black Box, EWS3, EWS4, and Mercedes EIS.

Tim Tracy and Charley Simpson will instruct this 8-hour Volkswagen/Audi (VAG) programming class. Equipment to be discussed will include Abrites (AVDI), VAG Tacho, Ross Tech VCDS, and VW/Audi ODIS. Using this equipment, the instructors will take you through key programming and module replacement on vehicles using Immo 1 through Immo 5. Diagnostic scanning and the ability to understand what modules in a vehicle may have been replaced will also be discussed. Hands-on demos will be included.