ABRITES - AVDI - VN002 Special Function - VAG Parts Adaptation
Available to Order
SKU:
ABRITES-AVDI-VN002
NSID:
8248
- $2,660.00
-
$3,690.00 - $2,660.00
- Translation missing: en.products.product.selected_or_first_available_variant.price.unit_price
- per
With the help of this special function you will be able to do module adaptation. This function represents one of the things Abrites is bet known for and is definitely one of the most used functions by our customers.
We are always on the front line of adaptation of used and new modules installed in Volkswagen / Audi / Seat / Skoda / Bentley / Lamborghini and even some Porsche vehicles. From the mild to the wild – from sound amplifiers and MMI units to Engine Control Units and Transmission Control Units and everything between.
Description
xHere is what you can use VN002 for:
- Extracting and displaying immobilizer related data by diagnostic. Ability for alignment of immobilizer related data – cluster/ecu. Displaying immobilizer related data from dump of flash andeeprom of micronas mcu in IPC.
- Read/Program memory of instrument cluster immobilizer
- Read/Update immobilizer related data
- Read/Update immobilizer data in VDO dashboards with NEC microcontroller (2009+) by OBDII
- Extracting and displaying PIN code, control module configuration memory content, component security data from engine control units EDC16, MED9.x, Simos PPD 1.1/1.5, Magneti Marelli 4HV,7GV. Emergency start for engine control units EDC16. The whole EEPROM could be read for EDC15/ME7/EDC16. For MED9 and Simos engine control units only the PIN/CS/MAC is displayed.
- Advanced Diagnostic Functionality - Ability to manage stored crash data and configuration memory of electronic control unit. Read/Update Config Data of airbag control units Siemens (CAN bus - ISO15765). Audi A6/Q7/Allroad, VW Golf5..., Skoda Octavia II ..., Seat Altea ... With this special function, you can Read/Update ConfData memory of the airbag module. Clear the crash data of the airbag module.
- Covered units for Read/Update ConfData:
- 1. All Siemens CAN Airbags 2003-2008 like 4F0959655B (Audi A6/Q7/Allroad 2003-2008), 1K0909605AB, 1K0909605C, 1K0909605AD, etc...
- 2. K-Line Airbags (Siemens and Bosch) - 1C0 909 605 C, 8L0 959 655 A, 1J0 909 609, 6Q0 909 605 C,6Q0 909 605 A, 6Q0 909 605 B, 3B0 959 655 B, 1C0 909 605 F, 1C0 909 605 H, 1J0 909 607, 1J0 909 603, 4B0 959 655 C, 4B0 959 655 J, 4D0 959 655 C, 8L0 959 655 F,8A0 959 655C, 8A0 959 655 K, 8A0 959 655 K, 4D0 959 655 H, 8D0 959 655 C, 8D0 959 655 L
- Preparation of a key ready for adaptation by diagnostic to the vehicles with BCM2 – Audi A4, S4, RS4, A5, S5, RS5, A6, A7, A8, Q5 / VW Touareg
- + ILM Front passenger ((ILM Beifahrer) - Audi A8 2003-2010
- Component protection generation 2
- EZS-Kessy Audi A6/Q7 2004-2009 by OBDII
- Comfort module Audi A6/Q7 2004-2009 by OBDII
- Climantronic Audi A6/Q7 2004-2009 by OBDII
- Airbag Audi A6/Q7 2004-2009 by OBDII
- Airbag Audi A4/A5/Q5 2008+ from Bosch by OBDII
- Instrument cluster Audi A6/Q7 2004-2009 by OBDII
- Instrument Cluster Audi A4/A5/Q5 2008+ by OBDII
- Infotainment electr. Audi A4/A5/Q5 2008+ by OBDII
- All other modules (e.g. DSP) with component protection generation 2
- for A6/Q7 2004-2009 and A4/A5/A5 possible only if you have dump from gateway from where module was originally build
- + Adaptation of engine control units to the vehicle - EDC16,EDC17, MED17, MED9, Simos PPD, ME7.5.20, ME7.5.30
- Kessy Audi A8/VW Touareg/Phaeton
- Comfort module VW Passat B6/CC
- Transmission gearbox Audi A6/Q7/Allroad/A8
- EZS-Kessy Audi A6/Q7/Allroad
- BCM2 immobilzier - Audi A4, S4, RS4, A5,S5, RS5, A6, A7, A8, Q5 / VW Touareg
- +read the PIN and CS of the EDC17/MED17 engine control units. With this function is possible to read even engine control units 2012+ which are with
- updated software and is not possible to read normally by OBDII.With this special function the EDC17/MED17 is not read through OBDII – you should have direct connection to the engine
- control unit. It is possible to make this on the table, you need to connect only 12V, GND, Ignition, CAN-H and CAN-L. It is possible to read the ECU also in the car, but you need to find
- somewhere the CAN-H (orange-black) and CAN-L (orange-brown) wires. So connect them to the AVDI and you will be able to read the engine control units.
- + adapt the transmission control unit (TCU) to the immobilizer (BCM2). For that purpose is necessary first to read the TCU. The TCU is not possible to be read by OBDII,
- but is possible to read it when you connect the TCU on the table, or when you connect the AVDI to the internal CAN-Bus of the car.
- DSG and CVT transmission units are also supported for adaptation.
- To read from the internal CAN-Bus, find the orange/black and orange/brown CAN wires and make the following connection of the AVDI:
- orange/black <-> CAN-H (PIN6 of the OBDII)
- orange/brown <-> CAN-L (PIN14 of the OBDII)
- Ground <-> GND (PIN4 of the OBDII)
- 12V <-> 12V (PIN16 of the OBDII)
- +reading the PIN/CS/MAC of the Simos PCR 2.1 engine control unit.
- NOTE: This function requires internet access
- This function includes all of the features of the following functions:
- AN043, AN045 AN046, AN047, AN048, AN049, AN052, AN053, AN055, AN056, AN057, AN058.
ALL SALES OF ABRITES PRODUCTS HARDWARE AND SOFTWARE ARE FINAL!
Note: This function requires internet access, This function includes all of the features of the following functions:, AN043, AN045 AN046, AN047, AN048, AN049, AN052, AN053, AN055, AN056, AN057, AN058.
ALL SALES OF ABRITES PRODUCTS HARDWARE AND SOFTWARE ARE FINAL!
Compatibility
xCompatible With
Notes
xNote: This function requires internet access, This function includes all of the features of the following functions:, AN043, AN045 AN046, AN047, AN048, AN049, AN052, AN053, AN055, AN056, AN057, AN058.
ALL SALES OF ABRITES PRODUCTS HARDWARE AND SOFTWARE ARE FINAL!