*Discontinued* Command Access - Electrified Latch Retraction Kit - For Kawneer 1686/1786 & AHT 8/9 series exit devices - 2/18 Gauge - 24 to 25.3 VDC
Out of Stock
SKU:
CAT-MLRK1-KAW17
NSID:
70146
- $336.00
-
- $336.00
- Translation missing: en.products.product.selected_or_first_available_variant.price.unit_price
- per
The MLRK1-KAWP is a robust, groundbreaking field installable motorized latch retraction kit for Kawneer 1686/1786 series exit devices. It utilizes our patent-pending custom ball screw assembly and CAT designed custom stepper motor to maximize the pulling force in a package small enough to fit inside the push pad with no clearance issues. The only hole you’ll need to drill is the raceway! It utilizes our PTS “Push to Set” technology making post-installation adjustments incredibly easy.
Features:
- MM4 Smart Module: On board diagnostics with
audible feedback for adjustment and power
issues - “PTS”: 5 second electronic adjustment for easy
post installation adjustment - Electric dogging rated for continuous duty - Auto
re-engage if push pad is pulled from dogged
position - Low Current Draw - Field switchable to a “Low
Current” or “High Torque” mode - Up to 300’ wire run with 2-18ga wire - Long
wire runs provides installer with convenience of
placing the Command locking hardware power
supply in a centralized location; i.e. the same
closet as the access control panel - 8’ cable with Quick Connect for MM4 module to easily connect to power supply lead.
- Optional add on: Pre-prepped for Request to Exit (REX) to be built-in or easy field add.
- 3-Year “No Hassle” Warranty
- $336.00
-
- $336.00
- Translation missing: en.products.product.selected_or_first_available_variant.price.unit_price
- per
Description
xSpecifications:
| Function: | Converts a mechanical Kawneer 1686/1786 Series Exit Device to an electrified latch pullback device. |
| Voltage Range: | 24 to 25.3 VDC |
| System Protection: | Unit shuts down when voltage exceeds 28VDC |
| Standard - Average Current Peak: | 1.3A |
| Standard - Average Current Hold: | 215mA |
| High Torque - Average Current Peak: | 2A |
| High Torque - Average Current Hold: | 250mA |
| PTS adjustment: | approx. 1/4” |
| Wire Run: | 300’ with 18ga wire |
| Device Cutdown Details: | 36” - 1” / 42” - 7” / 48” - 5.5” |
| Certifications: | ANSI/BHMA Meets or exceeds Series Grade 1 requirements UL Listed 3-hour fire rating |
| Warranty: | 3-Year Manufacturer Warranty |
Downloads: