HES - 1006 Electric Strike Kit for Latchbolt Locks w/ Faceplates - Fail Secure - 12/24VDC - UHS Hardware
HES - 1006 Electric Strike Kit for Latchbolt Locks w/ Faceplates - Fail Secure - 12/24VDC - UHS Hardware
HES - 1006 Electric Strike Kit for Latchbolt Locks w/ Faceplates - Fail Secure - 12/24VDC - UHS Hardware

HES - 1006 Electric Strike Kit for Latchbolt Locks w/ Faceplates - Fail Secure - 12/24 VDC

Available to Order
SKU: HES-1006CLB
NSID: 2126

Please Note: This product ships within 2 Days

$385.00
$462.00
$385.00


The 1006CLB is the electric strike for every latchbolt lock. It accommodates every cylindrical and mortise lockset for ANSI 4-7/8" strike plates with up to a 3/4" latchbolt.

Included in the box is a 1006 strike body, 3 faceplates (J, KD and KM) and all the necessary mounting hardware you will need.

The dual interlocking plunger design and heavy duty stainless steel construction of the 1006 series, enables it to exceed every standard developed for electric strikes.Tested to exceed 3,000 lbs. of static strength, 350 ft-lbs. of dynamic strength and factory tested to exceed 1,000,000 cycles of operation, the 1006 is in a class of its own.

More Information Below

Call 1-800-878-6604 for Bulk / Dealer Pricing!
Construction Stainless steel construction Tamper resistant
Static strength 2,500 lbs. (fail secure)
Dynamic strength 350 ft-lbs. (fail secure)
Endurance 1,000,000 cycles
Fail Safe / Fail Secure Fail secure (standard)
Voltage Dual voltage 12 or 24VDC continuous duty
Handing Non Handed
Solenoid Internally mounted solenoid
Deadbolt Prep Accommodates up to 1" deadbolt
Frame application
Metal
Wood
Connector Plug-in connector
Shims Full keeper shims for horizontal adjustment
Electrical .45 Amps at 12VDC* continuous duty
.25 Amps at 24VDC* continuous duty
*Note: DC must be well filtered with ripple less than 1 volt RMS.
Finish 630 - Satin stainless steel
Warranty Five year limited warranty

Downloads

Note: DC must be well filtered with ripple less than 1 volt RMS.

Compatible With

Note: DC must be well filtered with ripple less than 1 volt RMS.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Note: DC must be well filtered with ripple less than 1 volt RMS.