Keymaster Poldiag - Mercedes Benz / Audi/ VW Programmer - Full Complete Set
Available to Order
SKU:
FTA-KM-FULL
NSID:
20616
- $4,050.00
-
$4,500.00 - $4,050.00
- Unit price
- per
The Keymaster Poldiag is the LATEST PROGRAMMER for Mercedes Benz, Audi, VW. The Full Complete Set set with program activation for all supported brands and modules
- Unique functions
- Supports all types of stacks, steering wheel locks, keys, engine controls in Mercedes cars.
- Everything is done via OBD or IR
- Add, fix, use the ignition, ELV steering lock, engine control, key
- ALL KEY LOST at no extra cost.
- Unlimited Key Calculations
- Fast key generations
- No soldering or desoldering required
- $4,050.00
-
$4,500.00 - $4,050.00
- Unit price
- per
Download SOFTWARE HERE
Hardware Included:
- OBD Special Interface
- Special Programmer + Power adapter NEW type with BENCH MEDC17 Special Functions
- MB Key Adapter– for READ, RENEW KEYS with NEC memory. (ALSO Keyless Go Type Renew)
- IR cable reader– IR key with cable for operating EZS
- EZS\ELV cable adapter – for connection of EZS, ELV, ECUS, Gearbox modules, ISM modules on the bench.
- Audi Key adapter (for programming Audi BCM2 keys)
- Special adapter cable for read BCM2 with ENCRYPTED/LOCKED NEC! 2012-2018
Software Licenses Included:
- Dash A6 C7, A7 ,A8 D4,Touareg 2010+
- BCM2 read, write, by OBD. ELV OFF by OBD. Clone-change data by OBD
- PCR2,1 – Read ,write ,repair, update flash and CLONE ECU PCR2.1.
- Mercedes EIS
- Mercedes ESL
- VAG RB4,RB8 functions 7.Mercedes ML163 DAS
- PSG 16 Opel ECU
- Opel IMMO 1
- VAG Ecu ME7/9
- Renault ECU (sirius 32/34, EMS)
- NEC VDO Dashboard
- Nissan 12 digit immo calc
- Nissan , Infiniti immo calc
- Iveco MS6.x immo data
- Renault calculator
- VAG ECU EDC16
- AUDI A6 Kessy (C6 ,Q7, Touareg)
- VAG ECU Magneti MArelli
- VW Touareg key learning
- VAG ECU EDC16 CRAFTER
- Passat B6 key learning
- Audi A8 key learning (D3)
- VAG ECU Adaptatnion EDC16
- VAG ECU adaptation ME7/9
- VAG ECU Adaptation Magneti Marelli
- VAG ECU Adaptation CRAFTER edc16
- VAG EDC
- ECU EDC15
- Porsche Alarm system (2003-2010)
- Renault keys/cards learning
- 1 Year Subscription Free
OBD / IR Features:
(in the car or after connecting the cable to the ignition switch, lock, motor controller)
– Reading, writing, cleaning EIS on OBD or IR connector
– Calculating passwords
– Modification of data saved in EIS, ELV, ECU, VIN, KM, TP, Hash
– Reading information from the key after IR
– BE keys (also available from us) – have the possibility of saving, erasing and cleaning without risk. OBD IR
– Restoring stations or changing the content / restoring to the factory state
– Cloning of stations – IR downloading
– VIN change
– Erasing TP
– Personalization of new bolts.
DOES NOT REQUIRE ANY SOLDERING,
There is no need to remove the ignition housing
Everything is done via OBD / IR in the car or after connecting the adapter to the ignition plug, lock, motor controller ...
Functions of reading, deleting, writing.
Ignition locks, ELV interlocks, engine controls, transmission controllers.
Readout, writing, renewing ALL types of FBS3 stations on the OBD or IR interface (tested on 99% of stations up to 2014)
Personalization, activation of renewed items on the table.
Reading the password from the ignition switch, key without additional charges. No limits
Reading, renewing, modification of data stored in steering locks.
Read, renew drivers 7g Tronic - cooldown about 2 minutes !!
Read, renewed engine controllers.
Read, renew ISM / ESM
COPYING / CLONING all types of stations with NO need to solder or open the ignition.
Keys
EMERGENCY START all key lost- Possibility of emergency start-up in case of lost all keys to get to the workshop
Reading the password directly from the key (V51, V57)
Supports all types of keys: MOTOROLA, NEC, BGA, BE, Chines, VVDI types,
Reads, deletes / renews USED NEC, BE, Motorola keys
BE keys (also available with us) - have the option to change the frequency from the program level (315, 433Mhz) and
MULTIPLE save, delete, clean - Everything is done over IR in a few seconds !!
EMULATION function - Checking the path of the key, resetting the key counter,
ELV/ESL – support for steering lock – bolt
– Reading ESL by OBD (K-line)
– Restoring ESL Lock (cleaning used)
– ESL exchange
– VIN programming
– TP cleaning
– Automatic adjustment of the ESL Lock
– Checking the operation of ESL
– Repair ESL NEC W204 (fatal error: 0xAA) and older on Morotoli
– Programming and cleaning the emulator (renewal)
Reading / Programming CGW / ZGW eeprom and flash in the following models:
– A-Class (W169)
– B-Class (W245)
– C-Class (W204)
– E-Class (W211)
– E-Class (W212)
– GLK (X204)
– CLK (W207)
– CLS (W218)
– CLS (W219)
– Maybach (W240)
– SLK (R171)
– SLR (R199)
– SLS (R197)
– GL (X164)
– M-Class (W164)
– R-Class (W251)
– SMART
– S-Class (W221)
– CL (W216)
Supported models:
– W164
– W164 2009-
– W166, 197, 212, 218, 246
– W169, 209, 211
– W172, 204, 207, 212
– W203, 463, 639
– W202, 208, 210
– W215, 220
– W230
– W216
– W221
– W639 2009-
These models support counting the password after OBD:
– W164
– W164 2009-
– W166, 197, 212, 218, 246
– W169, 209, 211
– W172, 204, 207, 212 (old, with ELV)
– W216
– W221
– W639 2009-
Driver renewal: ECU engine / 7-tronic / ISM transmission gear selector –
Correction of the meter after OBD
– C (W204), GLK (X204), CLK (W207), E (W212), SLS (W197), CLS (W218)
– R-Class (W251), GL (X164), ML (W164)
– E-Class (W211), CLS (W219)
– S-Class (W221), CL (216)
– W166, W172, W246, W231
– W205
More videos HERE
Key programming machines cannot be returned after they have been registered
Compatible With
Key programming machines cannot be returned after they have been registered