Autel IM608 Pro II Full Kit & Xhorse Dolphin 2 XP-005L - Key Cutting and Programing Bundle (Autel USA)
- $4,770.17
-
$6,594.00 - $4,770.17
- Translation missing: en.products.product.selected_or_first_available_variant.price.unit_price
- per
AUTEL-IM608-DLPN-FULL
Autel IM608 Pro II Kit + Xhorse Dolphin XP-005L - Bundle
This Bundle Includes:
- Autel Key Programmer MaxiIM IM608 PRO II
- Autel G-BOX3 - Mercedes Benz & BMW Adapter For Autel Key Programmer IM508 / IM608PRO / IM508S / IM608PROII
- Autel APB112 Smart Key Simulator for Autel Key Programmer
- Autel - MaxiIM IMKPA - Expanded Key Programming Accesses for Renew / Unlock & More!
- Autel - CAN FD Adapter for 2018-2020 Ford / GM Vehicles
- TOPDON - Chrysler OBDII Security Gateway Bypass Cable for T-Ninja 1000
- Xhorse - Dolphin II XP-005L - High Sec Portable Key Cutting Machine / w Battery
Autel Key Programmer MaxiIM IM608 PRO II - The All-In-One Key Programming & Advanced Diagnostics Machine
The most advanced key programming tool that combines the powerful IMMO and programming functions with OE-level diagnostics and advanced service functions in one Android-based 10.1-inch touchscreen tablet.
Autel key programmer MaxiIM IM608 Pro II includes:
- MaxiIM IM608 Tablet
- XP400 Pro Key Programmer
- MaxiFlash ECU Reprogrammer
- Carry Case
- Cables, cords, and adapters
Powerful Hardware
- 10.1’’ Touchscreen
- Android Operating System
- XP400Pro Key And Chip Programmer Included
- JVCI Wireless J2534 Pass Thru Programming Device Included
IMMO & KEY PROGRAMMING
- Smart Mode For Guided And Automated Key Learning
- Read PIN/CS (All Keys Lost), Key Generation, Key Learning, Remote Learning
- IMMO ECU Reset/Adaptation, Refresh/Coding
- Transponder Read/Write, EEPROM/MCU Read/Write
- Expert Mode For Advanced Key Learning
DIAGNOSTICS & SERVICE
- Powerful Combination Of Key Programming, All System Diagnostics and Advanced Maintenance Services
- Powerful OE-Level Diagnostics for US, Asian and European Makes and Models
- Advanced Maintenance Services: EPB, DPF, SAS, Oil Reset, BMS
The Autel G-BOX3 is an adapter compatible with Autel’s MaxiIM IM608 and MaxiIM IM508 tablets (with the purchase of XP400Pro programmer) that aids in the programming of keys to Mercedes DAS3 CAN EIS/EXS vehicles in an ALL Keys Lost situation. The G-Box3 also supports DME/DDE ISN Reading and Writing in Boot Mode on applicable BMW vehicles. Bench Method is also supported. All Keys Lost password calculations are approximately 4x to 8x faster.
Less Time, More Secure!
- MaxiIM Key Programming Tablet Accessory, compatible with IM608 and IM508 (with XP400pro purchase)
- Mercedes-Benz All Keys Lost, Faster Password Calculation
- Mercedes-Benz All Keys Lost, eliminates repeated Insertions within the process
- Mercedes-Benz All Keys Lost, Can Be Programmed on the Vehicle Without Removing the Electronic Ignition Switch (EIS)
- BMW DME/DDE ISN Reading and Writing in Boot Mode or Bench Method
- Contains All Connections Including Cables, Fuse Connector, and CAN Line Connectors
- 1 Year Manufacturer Warranty from Autel
Autel APB112 Smart Key Simulator for Autel Key Programmer
The APB112 smart key simulator is used to collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle key chip. It can also simulate the vehicle key chip. Currently, it supports to simulate the 4D type chip. More key chip types will be supported with future upgrades.
Autel - MaxiIM IMKPA - Expanded Key Programming Accesses for Renew / Unlock & More!
- Supports over 10 key unlock types
- BMW EWS3 key learning
- Benz NEC key learning
- Benz ESL_W209 read/write/erase
- Compatible with IM508 and IM608 Autel key programmers
- (XP400Pro required)
- Includes 1-Year Warranty
Autel - CAN FD Adapter for 2018-201 Ford / GM Vehicles
Enables diagnostics of vehicles using the CAN FD (CAN Flexible Data-Rate) protocol used on newer GM and Ford vehicles.
- Compatible with VCI or VCI/J2534 device included with Gen 1 Autel MaxiSys units: MX808, MS905, MS906, MS906BT, MS906TS, MS908, MS908P, MSELITE
- Compatible with VCI/J2534 device included with the Gen 2 Autel MaxiSys units: MaxiADAS, MS908S, MS908SP, IM508, IM608
- One-year limited warranty
TOPDON - Chrysler OBDII Security Gateway Bypass Cable
- Top Don's bypass for Chrysler's Security Gateway Module (SGM) which limits aftermarket scan tools to only reading DTCs and viewing data.
- Most 2018 and newer FCA vehicles include a Security Gateway Module.
Xhorse - Dolphin II XP-005L - High Sec Portable Key Cutting Machine / w Battery
The Dolphin II XP-005L is the latest in portable key cutting technology from XHorse! Has all the capabilities of the Xhorse Dolphin XP-005 but with improved safety and smart capabilities.
Works with a phone app and Bluetooth connectivity.
A newly-added transparent protective cover can be moved freely to witness the key cutting process clearly at all times, and the working status is clear at a glance.
Prevent key debris from splashing around, combining cleanliness and safety.
The workbench is upgraded and lengthened, the working space is expanded and optimized, the stability is enhanced, and the multi-directional safety protection brings you more security.
Key Features:
- Support to cut key anywhere without a smartphone.
- Database covers 100 car brands, 2000 car models, 20000 keys.
- Built-in lithium battery, compact and lightweight design for ease carry.
- All aluminum body structure, strong & accurate.
- Ships with Multipurpose M5 Clamp (M1 and M2 in 1)
- New UI interface, easy & smart to control.
- SOFTWARE DOWNLOAD AVAILABLE HERE