Command Access - Electrified Latch Retraction Kit - For Falcon 24 / 25 series - 2/18 Gauge - 24-28 VDC
Command Access - Electrified Latch Retraction Kit - For Falcon 24 / 25 series - 2/18 Gauge - 24-28 VDC
Command Access - Electrified Latch Retraction Kit - For Falcon 24 / 25 series - 2/18 Gauge - 24-28 VDC
Command Access - Electrified Latch Retraction Kit - For Falcon 24 / 25 series - 2/18 Gauge - 24-28 VDC
Command Access - Electrified Latch Retraction Kit - For Falcon 24 / 25 series - 2/18 Gauge - 24-28 VDC

Command Access - Electrified Latch Retraction Kit - For Falcon 24 / 25 series - 2/18 Gauge - 24-28 VDC

$304.45 $325.35
Available: In Stock
Wishlist
  • Product SKU: CAT-MLRK1-FAL25
  • CAT-MLRK1-FAL25

    The Command Access MLRK1-FAL25 is a cost-effective and straightforward way to upgrade your Falcon 24/25 series device to motor-driven latch retraction in the field. MLRK1-FAL25 can convert a mechanical Falcon 24/25 series device to an electrified latch pullback device. Our easy-to-install motor-driven kit installs in a matter of seconds with no drilling or screws required, a true “drop-in” kit! PTS allows for an easy post-installation adjustment of the latch/latches. A built-in REX switch is standard on all units! Last but not least, features an updated MM4S module with 2 different energy consumption settings from energy conscious to high torque to get the tough jobs done!

    Features: 

    • MM4S Smart Module: On board diagnostics with audible feedback for adjustment and power issues.
    • “PTS”: 5 second electronic adjustment for easy post installation adjustment
    • Electric dogging rated for continuous duty
      - Auto re-engage if push pad is pulled from dogged position
    • Low Current Draw - Field switchable to “High Torque” mode
    • Up to 300’ wire run with 2-18ga wire - Long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel.
    • 8’ cable with Quick Connect for MM4S module to easily connect to power supply lead.

    $304.45

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Specifications:

Function:  Converts a mechanical Falcon 24/25 series device to an electrified latch pullback device.
Voltage Range: 24-28 VDC
System Protection: Unit shuts down when voltage exceeds 28VDC
Standard - Average Current Peak: 900mA
Standard - Average Current Hold: 215mA
High Torque - Average Current Peak: 2A
High Torque - Average Current Hold: 250mA
PTS adjustment: approx. 1/4”
Wire Run: 300’ with 18ga wire
Device Cutdown Details: 36” - 2” / 48” - 8”
Certifications: UL Listed 3-hour fire rating
Warranty: 3-Year Manufacturer Warranty

 

 

Downloads:

CAT-MLRK1-FAL25

The Command Access MLRK1-FAL25 is a cost-effective and straightforward way to upgrade your Falcon 24/25 series device to motor-driven latch retraction in the field. MLRK1-FAL25 can convert a mechanical Falcon 24/25 series device to an electrified latch pullback device. Our easy-to-install motor-driven kit installs in a matter of seconds with no drilling or screws required, a true “drop-in” kit! PTS allows for an easy post-installation adjustment of the latch/latches. A built-in REX switch is standard on all units! Last but not least, features an updated MM4S module with 2 different energy consumption settings from energy conscious to high torque to get the tough jobs done!

Features: 

  • MM4S Smart Module: On board diagnostics with audible feedback for adjustment and power issues.
  • “PTS”: 5 second electronic adjustment for easy post installation adjustment
  • Electric dogging rated for continuous duty
    - Auto re-engage if push pad is pulled from dogged position
  • Low Current Draw - Field switchable to “High Torque” mode
  • Up to 300’ wire run with 2-18ga wire - Long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel.
  • 8’ cable with Quick Connect for MM4S module to easily connect to power supply lead.

Specifications:

Function:  Converts a mechanical Falcon 24/25 series device to an electrified latch pullback device.
Voltage Range: 24-28 VDC
System Protection: Unit shuts down when voltage exceeds 28VDC
Standard - Average Current Peak: 900mA
Standard - Average Current Hold: 215mA
High Torque - Average Current Peak: 2A
High Torque - Average Current Hold: 250mA
PTS adjustment: approx. 1/4”
Wire Run: 300’ with 18ga wire
Device Cutdown Details: 36” - 2” / 48” - 8”
Certifications: UL Listed 3-hour fire rating
Warranty: 3-Year Manufacturer Warranty

 

 

Downloads:

Compatible With