*Discontinued* Microtronik - Autohex II BMW Professional Programmer - ECU Programmer
- $4,310.00
-
$5,172.00 - $4,310.00
- Translation missing: en.products.product.selected_or_first_available_variant.price.unit_price
- per
This is an Autohex II BMW Professional Programming Tool
This tool covers ECU programming and coding.
What you get:
- Autohex II Hardware WVCI HW 5.
- BMW Software Standard License.
- BMW Ecu Online Programming License.
- BMW Software ISN Boot Mode License.
- BMW ISTA/D driver to run dealer software.
- OBD Cable
- FEM Cable
- Tricore Cable
- USB Cable
- Power Adapter
- 1 year technical support.
- 1 year hardware warranty.
- $4,310.00
-
$5,172.00 - $4,310.00
- Translation missing: en.products.product.selected_or_first_available_variant.price.unit_price
- per
Description
x
Using this kit you can do following:
| Read ISN in G Series: |
MD1 and MG1 (MDG1) ISN Reading of following DME/DDE (writing is possible for some DMEs):
|
| Read and Write ISN in MD1 and MG1 F Series: |
MD1 and MG1 (MDG1) ISN Reading of following DME/DDE:
|
| Read and Write All ISN in F Series: |
Autohex II reads and writes all ISN of DME/DDE in F series:
|
| Read and Write All Long ISN in E Series: |
Autohex II reads all ISN of DME/DDE in E series:
|
| Read most of old ISN in E Series: |
Autohex II reads the ISN of DME/DDE in E series:
|
| Individual Programming for any Ecu (DOIP Protocol) | Autohex II is the most advanced tool for BMW Ecu programming, it supports E series, F Series and G Series |
| CAS1, CAS2, CAS3, CAS3+, CAS4 and CAS4+ ISN | With Autohex II you can read and write ISN from all CAS versions in E and F series |
| Read ISN from all Trciore DME/DDE by boot mode | This function is important when the DME/DDE is not responding, and you need the ISN for replacment |
| BMW E series EGS ISN matching with CAS | You can reset EWS security from all BMW E series EGS by OBD |
| BMW F series EGS EWS Reset for 6HP and 8HP models | You can reset EWS in EGS 6HP (On Bench) and 8HP by OBD or On Bench |
| BMW E series, F series, and G series Auto Coding | Autohex II calculates the required coding data automatically from the car vehicle order, then it applies these data to the target module |
| Managing the Vehicle Order (FA) in BMW cars | You can modify the Vehicle Order to do retrofit the configuraion. You can also backup and restore the FA from the backup ECU |
| Unlock Security from CAS4, CAS4+, FEM and BDC |
You can unlock secrity of CAS4/4+, BDC and FEM to able to:
|
| Read and Write ISN on Bench for MSX8X | With Autohex II you can read ISN of MSD80, MSD81, MSD85, MSD85Y, MSD87, MSV90 in E/F series on Bench without opening the ECU |
Specifications Table:
| Online Ecu Programming | YES |
| Ecu Coding | YES |
| Ecu Advanced Coding | YES |
| Read ISN DME and CAS | YES |
| Write ISN DME and CAS | YES |
| Read ISN From EGS 6HP/8HP | YES |
| Reset EGS EWS 6/8 HP | YES |
| DME ISN By Boot Mode | YES |
| Vehicle Order (FA) Manager | YES |
| Read CAS2,3,4,4+ Flash (BDM) | NO |
| CAS1,2,3,4 Key Programming | NO |
| FEM/BDC Key Programming | NO |
| CAS4/FEM/BDC Mileage Reset | YES |
| CAS/FEM/BDC Replacment | YES |
| Hextag Tool Included | NO |
| Technical Support | 1 year (Extendable) |